TPA3008D2 |
RFQ for TPA3008D2 Required Field |
 |
| Technical/Catalog Information | TPA3008D2EVM |
| Vendor | Texas Instruments |
| Category | Programmers, Development Systems |
| Amplifier Type | Class D |
| Board Type | Fully Populated |
| Max Output Power x Channels @ Load | 10W x 2 @ 16 Ohm |
| Output Type | 2-Channel (Stereo) |
| Operating Temperature | -40°C ~ 85°C |
| Voltage - Supply | 8.5 V ~ 18 V |
| Utilized IC / Part | TPA3008D2 |
| Supplied Contents | Board |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | TPA3008D2EVM TPA3008D2EVM 296 18926 ND 29618926ND 296-18926 |
| Product | Manufacturers | Pack | D/C |
| TPA3008D2 | - | QFP | - |
The TPA3008D2 is a 10-W (per channel) efficient, class-D audio amplifier for driving bridged-tied stereo speakers. The TPA3008D2 can drive stereo speakers as low as 8 W. The high efficiency of the TPA3008D2 eliminates the need for external heatsinks when playing music.
The gain of the amplifier is controlled by two gain The gain selections are 15.3, 21.2, 27.2,Noise and 31.8 dB.
The outputs are fully protected against shorts to GND, VCC, and output-to-output shorts. A fault ter- minal allows short-circuit fault reporting and automatic recovery. Thermal protection ensures that the maxi mum junction temperature is not exceeded.
Typical Application |
Features |
| · LCD Monitors and TVs· All-In-One PCs | · 10-W/Channel Into an 16-W Load From a 17-V Supply· Up to 92% Efficient, Class-D Operation Eliminates Need For Heatsinks· 8.5-V to 18-V Single-Supply Operation· Four Selectable, Fixed Gain Settings· Differential Inputs Minimizes Common-Mode Noise· Space-Saving, Thermally Enhanced PowerPAD™ Packaging· Thermal and Short-Circuit Protection With Auto Recovery Option· Pinout Similar to TPA3000D Family |
|
TPA3008D2 | ||
|
Supply voltage range |
AVCC, PVCC |
-0.3 V to 20 V |
|
Load Impedance, RL |
6 | |
|
Input voltage range, VI |
SHUTDOWN |
-0.3 V to VCC + 0.3 V |
|
GAIN0, GAIN1, RINN, RINP, LINN, LINP |
-0.3 V to 6 V | |
|
Continuous total power dissipation |
See Dissipation Rating Table | |
|
Operating freeair temperature range, TA |
- 40°C to 85°C | |
|
Operating junction temperature range, TJ |
- 40°C to 150°C | |
|
Storage temperature range, Tstg |
- 65°C to 150°C | |
|
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds |
260°C | |
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operat
